C11GS – 6 axis Multifunction CNC Breakout Board with Relay and spindle control
Product in stock
This card has been designed to provide a flexible interface and functions to your computer projects, by using parallel port CNC control software. This board comes as a response to many customers that have been asking for a faster way to connect devices and reduce the possibility of wiring errors. With buffered IO, high quality construction and easy hookup - this
You save: $10.00! (9.17%)
C11GS – 6 axis Multifunction CNC Breakout Board with Relay and spindle control
C11GS - 6 axis Multifunction CNC Breakout Board with Relay and spindle control
his card has been designed to provide a flexible interface and functions to your computer projects by using the parallel port or USB-based or Ethernet-based controller. This board comes as a response to many customers that have been asking for a faster way to connect devices and reduce the possibility of wiring errors.
This board is a new version of the C11G. Uses the exact same circuits but it is packaged in a different format using SMD components and push-lock terminals.
IEEE 1284 Standard compatible.Includes the circuitry recommended by the IEEE 1284 Level 1 standards for bidirectional parallel communications between personal computers and peripherals.
PULL-UP or PULL-DOWN selection for inputs.Includes jumpers to select the best input configuration for your application.
Buffered inputs and outputs. Outputs are buffered through the use of high speed and high current buffers allowing the card to output the signals without using the power from the parallel port. It can take the +3.3 or +5vdc signal from the parallel port and deliver solid +5vdc at 24 milliamps.
Microcontroller based SCHP.This board comes with a microcontroller that allows the implementation of a complex algorithm for sampling and analyzing the SCHP signal.
Built-in Variable Speed Control. It has an optoisolated analog 0- 10VDC output that will convert a PWM signal into an analog signal that can be used to command a commercial VFD. This analog can be adjusted using an on-board potentiometer, so this board can be adjusted to other voltages.
3 Electromechanical Relays with NO and NC positions. Mechanical relays are very flexible because they can be used for AC or DC and come with NO and NC (Normally Open and Normally Closed) positions.
Status LEDs on all inputs and output connections.No more guessing. You can SEE all your signals. Save valuable time and brainpower for CNCing. To avoid remaining current to the main load (driver or other device), all the indicator LEDs are driven by independent buffers of the ones that drive de output.
Input and output pins close to ground or +5vdc connections
Common terminal for pins 2-9 can be ground or +5vdc. Forget about grounding problems. Easily connect your pin by using your close by ground connection. No need to be an electronics expert to ground all your stuff. The board has a jumper that allows you to select if the common terminal to pins 2-9 will carry a ground or +5vdc. So if you are connecting encoders or proximity switches, you can select it to ground. If you are connecting Gecko drives or limit switches, you can set It to be +5VDC.
External Enable Pin (EN). The board has a pin that allows you to enable/disable all the outputs at once. The board requires +5vdc in the EN pin. If it is not present, it will send all the outputs to ground. You can use this to enable or disable the system manually, or you can install an external Safety Charge Pump or other external safety monitoring device.
Works directly with popular CNC hardware and software. Such as Gecko drive or Leadshine, and parallel port control software, such as mach2, Linux EMC, Turbo CNC, and others. (Not all tested).
All TTL 5VDC signals. Interface directly with parallel port interface products and other CNC4PC cards. 5VDC (TTL) cards are very common among automation devices.
Screw-On connections for all terminals. You only have to screw-on the wires to make all your connections.
All pins can be used in a concurrent manner.You can use all the input or output pins in a concurrent manner. For example, if you are using output pin #1 to control the Built-in Electromechanical Relay, you can also access that signal from the output pin on the board or from the DB25 connector for output. Each connection will not affect the other current from the other connection.
Beg_abc_Eng woman child model must have
Milla Jovovich guest judged this week, and Nina and Michael were in their rightful spots.kamagra reviews uk
Althea is the only one spared from judging and dismissed with adequate scores.pfizer viagra 100mg
Christopher manages to salvage his outfit a bit by shortening the skirt, but the belt outshines the entire outfit, which, as Milla notes, looked rather sad (not bright and Sante Fe ish).air max sport 2000
Edit: this may not be what you looking for, as I realize a lot of guys want to go for the top not.buy super kamagra
Wear it with confidence and itll look better.nike air max toddler girl
Haha.charles louboutin shoes
A pair of soccer shorts is just one simple component in the total gear of a player.louboutin homme prix
It does not really seem important.christian louboutin sale
However, for your child, you will always want the best.louboutin style shoes
I refuse to TORTURE him in order for him to fit into a social norm (yes, I see the TABOO glances from other moms who see a diaper peeking out from his pants).louboutin studded heels
I refuse to potty him until he is ready.mens christian louboutins ebay
Selfishly, I don want to experience that misery and unselfishly, I don want him to have issues.christian louboutin pigalle
I don think they can sexualize little children who are simply not sexual, but I think I will have a problem with 14 17 year olds wearing them.louboutin preis
If it weren for the fact that I would probably have daily confrontations at the pool this summer I would seriously consider taking the European approach and let the girls run around in just bottoms.christian louboutin shop deutschland
I honestly don see why we feel the need to cover up little girls any more than we do little boys when their bodies don show a difference at all.kamagra 100mg oral jelly buy
Technically speaking, LULU's financials have not borne that out.kamagra sildenafil citrate 100mg
However, indirectly, they have. SG for the fiscal year ended January 29, 2012 amounted to 28% of total revenue (which was almost exactly $1 billion). This year's amount includes $4.5 million of certain items that are detailed in our press release as non indicative of ongoing operations.Last year's SG on a non GAAP basis included a benefit of $1.6 million. SG on a non GAAP basis, taking the $4.5 million, as non operating expenses into consideration with a $109.3 million or 27% of sales. This compares to a $104.3 million, or 27.7% of sales last year.
Even though persons who lane a fashion connected occupational are other apt to gain from presence a fashion trade show, you know how to besides expenditure fashion shows to your be the owner of not public gain. If you are just engrossed in looking your preeminent or engrossed in education how you an incorporate the most modern fashion trends hooked on your clothes, you may well aspire to feel with reference to presence a fashion trade show. As earlier declared, fashion shows occur in a numeral of altered formats then, no material what you are looking to realize other with reference to, fashion wise, you be supposed to be talented to realize a numeral of fashion shows that know how to hand over you what you have to...
Copyright 2007-2017 | Automation Technology Inc.
Automation Technology Inc
310 Roma Jean Pkwy, Streamwood, IL 60107
For Customer Service, Email to us: Automationtechinc@yahoo.com
For Tech Support, Email to us: Automationtechincs@yahoo.com