Stepper Motor | Stepper Motor Driver | CNC Router | Laser Machine | 3D Printers For Sale » Featured Products » Breakout Boards and MPGs » Breakout Boards » C35 - Quick Setup Breakout Board, 4 axis

C35 – Quick Setup Breakout Board, 4 axis

Product in stock

This card provides an easy way of interfacing your inputs and outputs from the parallel port. It provides terminals and RJ45 for connections. It conditions the signals for use in CNC applications. (This is only the board, the drivers and adapters are separate)

Price

$38.67

Loading Updating cart...

C35 – Quick Setup Breakout Board, 4 axis

Product Description

1. Overview
This card provides an easy way of interfacing your inputs and outputs from the parallel  port. It provides terminals and RJ45 for connections. It conditions the signals for use in CNC applications.
2. Features
• IEEE 1284 Standard compatible.
Includes the circuitry recommended by the IEEE 1284 Level 1 standards for bidirectional parallel communications between personal computers and peripherals.
• RJ45 connectors for all I/Os. You only have to use standard networks cable to make all  your connections.

Easy connections with CNC4PC relay boards and speed control boards.
• Microcontroller based SCHP. This board comes with a microcontroller that allows the implementation of a complex algorithm for sampling and analyzing the SCHP signal.
• Easy way to connect up to 4 stepper motor drivers by using Networks cables. (Pins 2-9)
• Buffered inputs and outputs. Outputs are buffered through the use of high speed and high current buffers allowing the card to output the signals without using the power from the parallel port. It can take the +3.3 or +5vdc signal from the parallel port and deliver
solid +5vdc at 24 milliamps.
• Output pins 1, 2, 3, 4, 5, 6, 7, 8, 9, 14, 16, 17.
• Input pins 10, 11, 12, 13, 15.
• Input and output pins with close by ground or +5vdc connections
• External Enable Pin (EN). The board has a pin that allows you to enable/disable all the outputs at once. The board requires +5vdc in the EN pin. If it is not present, it will send all the outputs to ground. You can use this to enable or disable the system manually, or you can install an external Safety Charge Pump or other external safety monitoring device.
• Works directly with popular CNC hardware and software. Such as Geckodrive, Rutex, and parallel port control software, such as mach2, Linux EMC, TurboCNC, CNCPlayer, CNCZeus and others. (Not all tested).
• All TTL 5VDC signals. Interface directly with parallel port interface products and other CNC4PC cards. 5VDC (TTL) cards are very common among automation devices.
• Screw-On connections for input signal terminals.

Manuals & Downloads
C34-35RUser Manual (3435)

LoadingUpdating...