Stepper Motor | Stepper Motor Driver | CNC Router | Laser Machine | 3D Printers For Sale » Featured Products » CNC Milling Spindle » CNC Milling Spindle Kit 2200W (3.0HP) / Max. 6000RPM, (Brushless Motor and Driver),220VAC
CNC Milling Spindle Kit 2200W (3.0HP) / Max. 6000RPM, (Brushless Motor and Driver),220VAC
Sale!

CNC Milling Spindle Kit 2200W (3.0HP) / Max. 6000RPM, (Brushless Motor and Driver),220VAC

Product in stock

Price

$799.95 $699.95

You save: $100.00! (12.50%)

Loading Updating cart...

CNC Milling Spindle Kit 2200W (3.0HP) / Max. 6000RPM, (Brushless Motor and Driver),220VAC

Product Description

 

KL-2200_BLM Brushless Motor  2200W (3.0HP) / 6000RPM/ 220VAC
KL-2260_BLM Brushless Motor Driver kit:
AC 220VAC  input for 2200W (3HP)/500 RPM to 6000RPM Brushless Motor

It can not used for tapping or threading

Wiring Sample
2200Wwiring (32)

Panel Control:
1.Run     ----------  Bottom left Key
2.STOP------------Top Middle Key
3.Increase ---- --- Top Right Key
4.Decrease ------- Botton Right Key
5:  Configure  ------ Top Left

  • Exchange between panel and 0~10v analog A: Panel operation parameter setting Panel speed settings are as follows three parameters, after the restart into the panel speed mode panel operation mode: (FN000 = d0012, Fn001 = 1, FN010 = 36 Displays the current panel setup speed, After set this power off and Power on)
  • Analog speed mode: ( FN000 = d0005, Fn001 = 0,FN010 = 3 Displays the actual motor speed, After set this power off and Power on)
  • B:0-10v analog speed setting The following three parameters, after the restart into the analog speed and use the port to start and reverse speed<Press the Mode key when you see FN000, then press the Set key , you will see d0012, then press the down key to see d0005 ,then press the set key>Fn001 = 0<now press the modekey when you see Fn000 then press the Upkey to Fn001 then press the set key , you will see 1 press the down key to 0, then press the set key>FN010 = 3 Displays the actual motor speed<then now press the modekey when you see Fn000 then press the Upkey to Fn010 then press the set key , you will see 36 press the down key to 3, then press the set key>Step by Step,  then will change into 0~10V use
  • FN220: 1040 ( 0 to 5 VDC Control)
  • FN220: 520   ( 0 to 10 VDC control)

Additional Details

People who bought this item also bought


LoadingUpdating...