Stepper Motor | Stepper Motor Driver | CNC Router | Laser Machine | 3D Printers For Sale » Featured Products » CNC Milling Spindle » CNC Milling Spindle 1100W (1.5HP) / Max. 6000RPM, (Brushless Motor and Driver), KL-1160

CNC Milling Spindle 1100W (1.5HP) / Max. 6000RPM, (Brushless Motor and Driver), KL-1160

Product in stock

Price

$599.95

Loading Updating cart...

CNC Milling Spindle 1100W (1.5HP) / Max. 6000RPM, (Brushless Motor and Driver), KL-1160

Product Description

1: KL-1160_BLM Brushless Motor (Shaft Size 14mm) 1100W (1.5HP) / 6000RPM
IP54, Insulation Class F
Three Phase, 4 poles
U (Red), V ( Blue),  W (Black),  Yellow or Green (GND)
Hall Line: Red (+5V), Black (GND),

Yellow (SA), Blue (SB), Green (SC)

2: KL-1160_BLM Brushless Motor Driver kit:
AC110VAC or 220VAC input for 1100W (1.5HP)/ 400 RPM to 6000RPM Brushless Motor,

1.START----------Drives START control key
2.STOP------------Drive STOP control key
3.FWD---- --------Forward running control key
4.REV-------------- Reverse running control key
5.“S+”--------------Drive acceleration control key
6.“S-”---------------Drive deceleration control key
7.TAPPING------ -Drive TAPPING function control
8.LED--------------Tapping function indicator

START---Press this button under resting status is to START motor, at starting status, press this button is invalid
STOP---Press this button to STOP motor at running state, at the stop state, click this button is invalid
FWD--- motor will run on axial clockwise/anticlockwise as designed program after start motor.

REV---Press REV button motor will run at axial anticlockwise/clockwise direction against FWD. It is invalid operation for press this button when motor running at reverse status as designed program.
"S+"--- Acceleration control key. One short press to this button, motor speed will increase 20 RPM. Long press on this button to increase rotating speed rapidly, and only 5 seconds needed for speed from lowest up to highest.

"S-"--- Deceleration control key. One short press to this button, motor speed will decrease 20 RPM, Long press on this button to decrease rotating speed rapidly, and only 5 seconds needed for speed from highest to lowest. Motor will stop quickly if press "S-" and STOP at same time.
TAPPING--- At the starting status, press this button to enter TAPPING function, LED lights on, motor will turn to running at forward no matter motor status was forward or reverse.

Change to revere direction: swap V & W along with SA & SB

Specification (Downloads)
Spindlespecification (4302)

Wiring Sample (Downloads)
cncmillspindlekit (3280)

Spindle Mach3 Setup  (Downloads)
cncmillspindlemach3setup (2772)

Additional Details

LoadingUpdating...