Product Description

This module allows you to control the height of the plasma torch head relative to the workpiece during plasma CNC operation, it supports either raw torch head voltage or input of 0-10VDC, and the ARC OK, UP, and DOWN outputs are isolated.

FEATURES

• Optoisolated output working at 5 to 24VDC or open collector
• A built-in voltage distributor can connect to the voltage on the torch, or the 0-10VDC can be used from a voltage divider from the plasma.
• 10 to 30VDC Power Terminal (+24 Typical).
• Isolated Power Connection.
• Voltage Divided software adjustable.
• Divider input.
• Status LED.
• Din Rail Mountable (Optional)
• Mini-Display. (Optional)
• Screen for Mach4 and UCCNC:  On the new screen, all the operating parameters can be adjusted on the fly.
• Macros to update operating parameters for Mach4 and UCCNC: Macros that can be run from G-code allow you to update parameters via G-code.  So these could be set on the post.
• LEDs on the unit show TEST MODE, UP, DOWN, ARC OK, and Bluetooth communication.

Note:

• Mach3 does not support Bluetooth connection, so the Mini-Display is required
  
• This unit is not compatible with High-Frequency Plasma Cutters.

Links:

Connection C25XP Rev.5 and THC-2 Rev.5

Connection AXBB with THC-2, PTS-1 and Powermax 65/85