Product Description

2200W 3HP Water Cooled CNC Drilling Spindle, KL-2200D (Round) 220V

Rated power 2.2 kw
Rated voltage 220 V
Rated rotating speed 1500-12000 r/min
Rated frequency 50-400 Hz
Rated current 6.4 A
ER nut ER-20
Bearing model 7005C×2 7002C×2
Bearing lubrication Grease lubrication
Weight 8 KG
Rotating mode anticlockwise from the shaft
extension end

Wiring description:
Pin 4-pin socket, U, V, W
and ground

Special warning:
1. The electric main shaft shall be installed at the clamped position; otherwise the bearing will
be easily damaged!
2. The compressed air shall be dry and clean, and the filtering accuracy shall be 0.1 micron!
Atmospheric pressure is 0.1- 0.2MPa, and the air seal shall be normally open. It is
recommended to use the two-level filtration, with the filtration accuracy of 0.5 micron/0.1
micron respectively, and the air filter shall have automatic discharge device.

Download:

KL-2200DTorque (1 download)

KL-2200D (2 downloads)