» Featured Products » CNC Spindles & VFDs » CNC Spindles » 220V WATER COOLED SPINDLE MOTOR ER20 2.2KW SPINDLE + 2.2KW DRIVE INVERTER VFD
220V WATER COOLED SPINDLE MOTOR ER20 2.2KW SPINDLE + 2.2KW DRIVE INVERTER VFD
Product in stock
Price
$519.00
220V WATER COOLED SPINDLE MOTOR ER20 2.2KW SPINDLE + 2.2KW DRIVE INVERTER VFD
Product Description
2.2KW WATER-COOLED MOTOR SPINDLE AND MATCHING INVERTER +80mm CLAMP+COOLED WATER PUMP SET
Package includes:
1 x Water Pump
1 x 80mm Spindle Clamp
Specifications:
A. 2200W 3HP Water Cooled CNC Milling Spindle KL-2200
- WATER-COOLED ER20 COLLET CHUCK
- Adopt Japanese Imported Bearing
- PASS ISO9001 AND CE QUALITY CERTIFICATION
- Spec: 80*215mm(Middle body diameter 80*215mm)
- Power: 2.2KW
- Voltage: 220 V
- Frequency: 0-400HZ
- Speed: 8000-24000RPM
- ER20 Collet chuck water-cooled
- Runout off: Less than 0.005mm
- Grease lubrication
B. 2.2KW Variable Frequency Drive Inverter
- Input voltage: 220V±5%
- we also stock1.5KW,3KW,4KW,5.5KW,7.5KW inverter, pls contact with us if you need)
- Input Frequency: 48-63HZ
- Output Frequency: 0-400HZ
- Input Phase: Suit for 1 phase input and 3 Phase input.
- Output: 3 Phase
Warranty: One year
Parameter set up for VFD:
F0.00 = 1 (or 3 if you want to test using the knob on the VFD)
F0.02=1001 (or 1000 if you want to test using the knob on VFD)
F0.04= 400 or up to 1000HZ set according your spindle
F0.05=10
F0.06=10
F0.11=0
F0.12=400 or up to 1000HZ set according your spindle
F0.13=220
F1.00 =0
F1.01 =10V
F1.03=0
F1.04 =400, up to 1000HZ set according your spindle
F3.08=3 ( Show spindle running speed on screen)
F2.19=1 ( If your spindle is 2 pole)
F1.08=11 ( Terminal X1 as a Run)
F1.14=8 ( Inverter Fault signal Output)
TA, Tc connect to fault output
X1 and Com connect to Run (or relay)
AI1 and GND ( 0-10VDC)
You can use this tube for the spindle:
Additional Details
Updating... 