6 Axis USB MOTION CONTROLLER for Mach3, Mach4 UC100, or UCCNC
Product Description
USB MOTION CONTROLLER for MACH3, MACH4, UCCNC software
Windows 2000, Windows XP, Windows Vista, or Windows 7 , Window 10 , Operating System will be ok ( 64Bit or 32bits)
Include: 1pcs UC-100, 1pcs USB cable
USB cable: 1.8 meter long
If you need the Gender Changer, click the link and add
DB25 MALE TO DB25 MALE M/M Mini Gender Changer Coupler
Features:
- Very Easy to connect to the existing mach3 DB25 Breakout board or any new DB25 breakout Board.
- Controls up to 6-axis simultaneously.
- Works with Mach3, Mach4 , UCCNC software via plugin.
- Upto 100kHz operation.
- USB connection from your PC to DB25 controller.
- Same pinout as a standard LPT port.
- Fast communication with data buffer for robust and stable operation.
SPECIFICATIONS:
- Automatic firmware checking and firmware update.
- Motion control on upto 6-axis (X, Y, Z, A, B, C).
- Configurable maximum stepping frequency, the options are 25kHz(with 20usec pulse
length), 50kHz(with 10usec pulse length), 100kHz(with 5usec pulse length).
- On the fly configurable 12 pieces of 5Volt (TTL level) buffered outputs. The current
sink/source capability is 20mA max. per output.
- On the fly configurable 5 pieces of 5V (TTL level) schmitt triggered and filtered inputs.
The input internal pullup resistance to 5Volts is 4.7kOhms.
- About 1 second long communication buffer.
- 100% LPT port compatible pinout.
FEATURES
- Reference inputs.
- E-stop input.
- Softlimits.
- Limit switch inputs.
- Limits override.
- Index input (extended function supports multi slot sensors).
- Spindle speed PWM control output.
- Step and direction spindle control output.
- Spindle and coolant relay control.
- Charge pump safety signal output (configurable to active/inactive when in E-stop).
- Charge pump adjustable frequency (12.50kHz in normal or 5kHz in laser mode).
- All signals configurable to active High/Low.
- General purpose I/O signals handling.
- Offline mode.
- MPG1 and MPG2 support.
- Slave axis.
- Backlash compensation.
- Digit/probe input.
- THC control inputs.
Product Manual& Downloads
if you do not have mach3 software, you can use this software too ,
Click for UCCNC software. This software works great
Click for USB MOTION CONTROLLER for Mach3 plugin
UC100 Troubleshoot for Window 10 or 11:
Install Mach3 Plugin and Software Prerequirements
Additional Details
Currently the automatic installer is working under the following operating systems:
Windows XP
Windows 7 32bit and 64bit versions.
Windows 8 32bit and 64bit versions.
Windows 8.1 32bit and 64bit versions or more later |