» Featured Products » Hybrid Stepper Motor Drivers » EtherCAT Stepper Driver » EtherCAT Servo Motor Kit, 2000W 220VAC

EtherCAT Servo Motor Kit, 2000W 220VAC

Product in stock


from $879.00

Loading Updating cart...

EtherCAT Servo Motor Kit, 2000W 220VAC

Product Description

AC 220V, No Power Supply, No Breakout Board,  Easy to wire

Following items are included:

A: 1 Pc EtherCAT Servo Motor  2000W

Model Number: ELM2000LM130F-H

Motor Specification:

Rated Voltage: 220VAC

Rated Power: 2000W

Rated Torque: 7.7 (N.m)

Peak Torque: 22(N.m)

Rated Speed: 2500 RPM

Peak Speed: 3000 RPM

Rated Current: 7.5Amp

Peak Current: 22 Amp

Torque Const: 1.03 (N.m/Amp)

Back EMP Const: 68 ( V/Krpm)

Resistance: 1.01 Ohm

Inertia(kg*m2*10-4): 5.3

Inductance: 2.94 mH

Poles: 8

Encoder Type: 23 Bit absolute

Protection Level: IP65

B: 1 Pc EtherCAT Servo Driver

Model Number: ELP-EC2000Z

Following cables are included.

You can choose either 5 Meter or 3 Meter length:

-- 1 Pc Cable-7BMA5M0-HZ "5-Meter encoder cable with battery"

-- 1 Pc Cable-RZ5M0-H - 5-Meter power cable


1 Pc Cable-7BMA3M0-HZ "3-Meter encoder cable with battery" ,

1 Pc Cable-RZ3M0-H - 3-Meter power cable

If you would like to order the Servo Motor with brake, please contact us

Driver Specifications:

Servo drive model: ELP-EC2000Z
Rated output power: 2000W
Rated output current(A): 12
Max output current(A): 36
Dimensions(mm): 80*175*156
Main power: 1 or 3-phase 190Vac – 240Vac,50/60Hz
Control mode: IGBT SVPWM sinusoidal wave control
Feedback mode: 17bit single-turn incremental encoder/23bit multi-turn absolute encoder
Input pulse: 0-500kHZ,5V differential input
Position band width: 200HZ
Electronic gear ratio: 1~8388608/1~8388608
Analog input: -10~10Vdc,input resistance 20KΩ, no isolation
Velocity bandwidth: 500HZ
Input signal: DI: 9 programable digital inputs, allows sink connection, Servo enable, over-travel inhibition, gain switching, command pulse inhibition, speed zero clamp, deviation counter clear, alarm clear
Output signal: DO: 6 programable digital outputs, Alarm output, servo-ready, at-speed, zero-detection, velocity coincidence
Encoder signal output: A phase, B phase, Z phase, long-distance drive mode output
Alarm function: Over-voltage, under-voltage, over-current, over-load, encoder error, position deviation error, brake alarm, limit alarm, over-speed error etc.
Debug software: All setting values of current loop, velocity loop , position loop can be modified and saved with Motion Studio software , all setting values can be downloaded and uploaded
Communication interface: USB:Based on Modbus protocol (according to USB2.0 specification) RS485
Brake mode: Built-in brake resistor or external resistor
Adapt load inertia: Less than 30 times motor inertia
weight: About 1.5-3Kg

If you need the Mach4 license, check the link:

Fully Licensed versions of Mach4, Email you the license.

Check the link to see Video

EtherCAT Video for Maho CNC Conversion from Tony (65)

EtherCAT Video (365)

*One Year Warranty*


EtherCAT 2000W Servo Motor Drawing (66 downloads)

EtherCAT Servo Driver User Manual (1022 downloads)

EtherCAT Servo Motor Kit Wiring Diagram (701 downloads)

XML File for EtherCAT Servo Driver (396 downloads)

Additional Details