» Featured Products » AC/DC Servo Motor » 400 W NEMA23 Servo Motor Kit with 1/4" shaft

400 W NEMA23 Servo Motor Kit with 1/4″ shaft

Product in stock

Price

from $394.00

Loading Updating cart...

400 W NEMA23 Servo Motor Kit with 1/4″ shaft

Product Description

DMM DYN2 Servo Motor Kit 400W at 60V:

1: NEMA 23 Frame Servo Motor [57N-DHT-A6TD1] : Watts: 400W

Standard NEMA23 mount with 1/4" shaft. Shaft with two flat seats.

2: Servo Driver: [DYN2-TLA6S-00]

  • Low Voltage +60VDC Operation [ Min. +24VDC Max. +75VDC ]
  • Position, Velocity, Torque Servo Modes
  • 4-Wire high speed serial encoder bus, with 8-bit security code for most reliable position feedback
  • 16-bit (65,536ppr) resolution absolute encoder
  • General Purpose Pulse/Analog Command
  • Opto-isolated 25kHz PWM sinusoidal amplifier
  • Industry leading package size - 20A peak current capacity
  • Serial RS232 [UART,SPI] Point to Point, S-Curve, Linear & Circular Coordinated Motion. Absolute encoder position feedback. Absolute/Incremental modes.

Parts are included in Kit:

1: Servo Motor: 57N-DHT-A6TD1

2: Servo Driver: DYN2-TLA6S-00

3: Motor Cable and Encoder Cable, Optional length: 3M, 5M, 10M, or 15M

4: A free USB tuning cable: CA-MTUSB-FR1

One Year Warranty

Documents and Downloads:

PDHT / DST SERIES AC SERVO MOTOR SPECIFICATION MANUAL

DYN2 System Catalog

Modbus Specification Manual

Specification Manual

Servo Motor Model
Rated Output 0.4kW
Rated Voltage 60VDC
Applicable Servo Drive DYN2
Rated Torque 1.27Nm
Instantaneous Max. Torque 3.82Nm
Rated Current 8.4A
Max. Current 21.0A
Rated Speed 3000rpm
Max. Speed 5000rpm
Rotor Inertia 0.426kg-cm^2
Torque Coefficient 0.181N∙m/A
Encoder 16-bit Absolute [ ABS-16-01 ]
Mass 1.65kg
Ratings Time Rating: Continuous
Thermal Class: F
Excitation Method: Permanent Magnet
Insulation Resistance: DC500V, >20MΩ
Noise: ≤60dB; No Special Noise
Environment Ambient Temperature: 0~40 °C
Storage: -20~50°C
Ambient Humidity: 20~80%
No Condensation
Enclosure IP65
Shock 98m/s2 Max. (10G)

Additional Details

LoadingUpdating...