» Featured Products » CNC Routers, Milling, Plasma » Taig Gecko CNC Mill Milling Machine Engraver Router

Taig Gecko CNC Mill Milling Machine Engraver Router

Product in stock



Loading Updating cart...

Taig Gecko CNC Mill Milling Machine Engraver Router

Product Description

1: New USA made Taig 2019CR-ER Cnc Mill This is the bigger taig mill

1 year warranty on mill and electronics, no return accept

This includes 6 ER16 collets ( 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 ) a Vise, and 2 End mills (1/8 & 3/16 inch) .

The Knob on the shaft (on the picture) is not included any more

This is a very robust and heavy machine 110 pounds of shipping weight

2: The controller features a 10 microstepping Gecko G540 stepper driver running at 48volts, 7.3A

Why is 48volts volts so important? Faster rapids and more power

Why is microstepping so important? Real smooth cuts

- Mid-band resonance compensation

- Auto standby current (70% current)

- Short-circuit protected

- Optoisolation on all LPT signal pins

- Two 1A at 0 to 50VDC rated outputs

- Four SPST to GND inputs (TTL)

- TRIM adjust for motor smoothness

- Easy to service, removable drives

- 10kHz watchdog timer (charge pump)

Stepper motors feature:

  1. Low inductance: NEMA 270oz bipolar stepper motors for x, y, z

  2. They produce quick rapids for faster production time

3: Milling Machine Specs:

The bottom of the slot is ½ the opening or top of the slot is 1/4

X travel

12 inch

Greatest travel

Y travel

5.5 inch

Z travel

6 inch

Spindle Motor

 ¼ hp 1100-11,000 rpm

Continuous duty for all day operation 120volt

double shaft Stepper X, Y, Z axes

270 oz in

of holding torque

Lead screw

20 tpi X Â ½ inch


Table size

3.5 x 18.5


Position increment resolution 0.000025 thats 40000 steps per inch now that is smooth

Z-Axis can swivel 90 degrees left or right

Rigid square tubular steel base and column construction

X Axis - Hard Anodized cross slide table with 45 degree dovetail ways with brass gibs

Y Axis - Precision ground prismatic steel rail ways with brass gib

Z Axis - Steel box ways with brass gibs

The X, Y, Z and A axis can cut stainless steel

We tested this controller with Mach 3 cnc control program

  1. You can add a USB UC100 to run Mach3 or Mach4 or UCCNC software:

  2. You can add a  Ethernet Board to run Mach3 or Mach4 or UCCNC
  3.  You can run  Linux CNC too using DB25 connection:

I5 LinuxCNC Control PC with 19'' Monitor


  • Converts a standard PC to a fully featured CNC controller.

  • Up to 6 axis cnc control

  • Allows direct import of DXF BMP JPG and HPGL.

  • Visual G-Code display

    Now with integrated 2d cam program

  • Generates G-code


  • Gear cutting

  • Digitizing

  • Holes

  • Slots and keyways

  • Text engraving

  • Many standard shapes

  • Surfacing


  • Other wizards from third party vendors

The mach 3 program is not included but you can buy it from us at $149

You can also download the demo it is good for 500 lines of code (that is a lot)

The machine will be shipped in a week. you need to assemble following the instructions and video.

We will ship out in 3-4 days after the payments are done

The following items are included :

  1. Taig 2019cr er cnc mill

  2. Gecko 4 axis control box

  3. 270 oz double shaft stepper motors with cables and positioning knobs


Additional Details