posted by | on | Comments Off on 3/4 Axis Mach3 CNC Controller Board Ethernet Motion Card Ethernet Connection

MK3-ET 3 or 4 Axis Mach3 CNC Controller Board Ethernet Motion Card Ethernet Connection CNC Motion Controller

Features:
– Ethernet interface motion control card for Windows XP, 7, and 10 systems
– 4-channel differential signal output: pulse + direction
– Maximum 2000KHZ pulse output for each axis, supporting stepper motors and servo motors
– 1 channel analog output: spindle supports frequency converter, stepper driver, and servo driver
– 4-way encoder feedback input to realize closed-loop control
– Has 16 input ports and 8 output ports
– All IO input ports and output ports are designed with optocoupler isolation, featuring strong anti-interference ability and stable performance
– With working indicator light, it is convenient to know the working status of the control card

Package Included:
– 1 x Control Card
– 1 x Driver CD
– 1 x Cable
– 1 x Manuals

xhc cnc breakout board wiring diagram

posted by | on | Comments Off on 3/4 Axis CNC Mach3 USB Motion Control Card Breakout Board

Features:
– Fully support all Mach3 version
– Support save data when power off.
– Support spindle speed feedback
– Support 3 meter USB cable
– Supports 3-axis or 4-axis
– Maximum step-pulse frequency is 2000KHz. Status indicator LED can be useful to show the USB
– Connection, and working status by flashing.
– 16 general-purpose input, 8 output has speed function, the spindle actual speed Mach3
– Interface in real-time display
– All IO-port isolation, interference, stable performance
– Full support for USB hot-swappable, the card is Monitoring USB connection status at any time

Key feature:
1.Standard usb device and work at all windows with usb hot plug.
2.The card state is monitored.
3.Support 6 axis to motion at the same time.
4.Step Pulse frequency Up to 2000khz, support servo and step motor driver.
5.The usb state indication with led
6.All io is isolated, anti-noise and stable performance
7.Spindle control with PWM and step/pulse
8.Aluminum shell, shield the interference.
9.Speed index function.
10.Power off and continue function

Software installation:
– First, install Mach3 software to your PC.
– Second, copy your driver into Mach3. Check readme file in the CD.
– Check our wiring for reference, connect our card to your machine correctly.
– Connect your PC to our card by using network cable.
– After these steps, you can open your Mach3 software for operating.

Please take a look at Mach3 software parameters setting, steps per and so on in the printed manual of our packing box for reference.

Package List:
– 1 x MKX-V motion card     
– 1 x Use wire     
– 1 x Driver disk     
– 1 x MACH3-USB trouble shooting     
– 1 x MACH3 config and driver installation     
– 1 x MKX –V user Manual

 Downloads:

MK3-V Mach3 Board Wiring Diagram (232 downloads)

XHC MKX-V 3 Axis CNC Motion Controller size