1: New USA made Taig 2019CR-ER Cnc Mill This is the bigger taig mill
1 year warranty on mill and electronics, no return accept
This includes 6 ER16 collets ( 1/16, 1/8, 3/16, 1/4, 5/16, 3/8 ) a Vise, and 2 End mills (1/8 & 3/16 inch) .
The Knob on the shaft (on the picture) is not included any more
This is a very robust and heavy machine 110 pounds of shipping weight
2: The controller features a 10 microstepping Gecko G540 stepper driver running at 48volts, 7.3A
Why is 48volts volts so important? Faster rapids and more power
Why is microstepping so important? Real smooth cuts
– Mid-band resonance compensation
– Auto standby current (70% current)
– Short-circuit protected
– Optoisolation on all LPT signal pins
– Two 1A at 0 to 50VDC rated outputs
– Four SPST to GND inputs (TTL)
– TRIM adjust for motor smoothness
– Easy to service, removable drives
– 10kHz watchdog timer (charge pump)
Stepper motors feature:
-
Low inductance: NEMA 270oz bipolar stepper motors for x, y, z
-
They produce quick rapids for faster production time
3: Milling Machine Specs:
The bottom of the slot is ½ the opening or top of the slot is 1/4
X travel |
12 inch |
Greatest travel |
Y travel |
5.5 inch |
|
Z travel |
6 inch |
|
Spindle Motor |
 ¼ hp 1100-11,000 rpm |
Continuous duty for all day operation 120volt |
double shaft Stepper X, Y, Z axes |
270 oz in |
of holding torque |
|
||
Lead screw |
20 tpi X Â ½ inch |
Beefy |
Table size |
3.5 x 18.5 |
Big |
Position increment resolution 0.000025 thats 40000 steps per inch now that is smooth
Z-Axis can swivel 90 degrees left or right
Rigid square tubular steel base and column construction
X Axis – Hard Anodized cross slide table with 45 degree dovetail ways with brass gibs
Y Axis – Precision ground prismatic steel rail ways with brass gib
Z Axis – Steel box ways with brass gibs
The X, Y, Z and A axis can cut stainless steel
We tested this controller with Mach 3 cnc control program
-
You can add a USB UC100 to run Mach3 or Mach4 or UCCNC software:
- You can add a Ethernet Board to run Mach3 or Mach4 or UCCNC
- You can run Linux CNC too using DB25 connection:
I5 LinuxCNC Control PC with 19” Monitor
MACH 3 FEATURES
-
Converts a standard PC to a fully featured CNC controller.
-
Up to 6 axis cnc control
-
Allows direct import of DXF BMP JPG and HPGL.
-
Visual G-Code display
Now with integrated 2d cam program
-
Generates G-code
FREE WIZARDS INCLUDED
-
Gear cutting
-
Digitizing
-
Holes
-
Slots and keyways
-
Text engraving
-
Many standard shapes
-
Surfacing
-
MANY MORE
-
Other wizards from third party vendors
The mach 3 program is not included but you can buy it from us at $149
You can also download the demo it is good for 500 lines of code (that is a lot)
The machine will be shipped in a week. you need to assemble following the instructions and video.
We will ship out in 3-4 days after the payments are done
The following items are included :
-
Taig 2019cr er cnc mill
-
Gecko 4 axis control box
-
270 oz double shaft stepper motors with cables and positioning knobs