DMM DYN2 Servo Motor Kit 400W at 60V:
1: NEMA 23 Frame Servo Motor [57N-DHT-A6TD1] : Watts: 400W
Standard NEMA23 mount with 1/4″ shaft. Shaft with two flat seats.
2: Servo Driver: [DYN2-TLA6S-00]
- Low Voltage +60VDC Operation [ Min. +24VDC Max. +75VDC ]
- Position, Velocity, Torque Servo Modes
- 4-Wire high speed serial encoder bus, with 8-bit security code for most reliable position feedback
- 16-bit (65,536ppr) resolution absolute encoder
- General Purpose Pulse/Analog Command
- Opto-isolated 25kHz PWM sinusoidal amplifier
- Industry leading package size – 20A peak current capacity
- Serial RS232 [UART,SPI] Point to Point, S-Curve, Linear & Circular Coordinated Motion. Absolute encoder position feedback. Absolute/Incremental modes.
Parts are included in Kit:
1: Servo Motor: 57N-DHT-A6TD1
2: Servo Driver: DYN2-TLA6S-00
3: Motor Cable and Encoder Cable, Optional length: 3M, 5M, 10M, or 15M
4: A free USB tuning cable: CA-MTUSB-FR1
One Year Warranty
Documents and Downloads:
PDHT / DST SERIES AC SERVO MOTOR SPECIFICATION MANUAL
Servo Motor Model | ||
---|---|---|
Rated Output | 0.4kW | |
Rated Voltage | 60VDC | |
Applicable Servo Drive | DYN2 | |
Rated Torque | 1.27Nm | |
Instantaneous Max. Torque | 3.82Nm | |
Rated Current | 8.4A | |
Max. Current | 21.0A | |
Rated Speed | 3000rpm | |
Max. Speed | 5000rpm | |
Rotor Inertia | 0.426kg-cm^2 | |
Torque Coefficient | 0.181N∙m/A | |
Encoder | 16-bit Absolute [ ABS-16-01 ] | |
Mass | 1.65kg | |
Ratings | Time Rating: Continuous Thermal Class: F Excitation Method: Permanent Magnet Insulation Resistance: DC500V, >20MΩ Noise: ≤60dB; No Special Noise |
|
Environment | Ambient Temperature: 0~40 °C Storage: -20~50°C Ambient Humidity: 20~80% No Condensation |
|
Enclosure | IP65 | |
Shock | 98m/s2 Max. (10G) |