KL-1313 CNC Router 51″ x 51″ x 11.0″, with Mach3 or Mach4 control, or UCCNC
T slot, Vacuum Table, Helical Rack and Pinion
Pls contact us to quote the shipping fee according your address
1: KL-1313 CNC Router ~51″ x 51″ x 11 “, It has T-slots and Vacuum Table, helical rack and pinion in X, Y axis, It has Mach3 spindle and relay control board with USB Connection, you can use 32bit or 64 bit computer
Machine with 3.2W Water Cooled Spindle + 3.2KW 400Hz Variable Frequency Drive, 6000-24000 RPM
ER20 Collet Chuck
Working Size X,Y,Z : 1300 x 1300 x 270mm ( about 51″ x 51″ x 11”)
NEMA34 Stepper Motor and Driver: 495 oz-in, 6A with 5:1 Pulley Reduction
Automatic Lubricated System
Resolution: about 0.05 mm
X, Y, Z Repeatability: 0.02 mm
Working Speed : 100 -500 IPM
Rapid: 500-800 IPM
X, Y, Z axis Stepper Motor Driver: High Quality Stepper Motor Driver
X, Y, Z Optical Switch
E- Stop, Z Height Probe
X Axis: Rack Pinion Modulus: 1.25 mod
Y Axis: helical rack and pinion (Modulus: 1.25 mod) with pulley reduction 4:1
Z Axis 20m Linear Rail with 25mm Ball screw, 10mm lead
Spindle speed: 6000 to 24000 RPM
Table Grid Size: 8mm x 8mm
Each panel has a Valve to Control ON/OFF
Machine size: 2050*2050*1700mm ( 80.7 ” x 80.7″ x 66.9″)
Machine Weight: About 1500 lbs
One year USA parts warranty
You can come to our show room to check the machine.
USA Tech Support Phone: 847-984-0882
2: You can run the router at 110VAc or 220VAC with a step-up transformer, from 110VAC to 220VAC ( Transformer is not included)
3: We use this Ethernet Board: Mach3 or Mach4 ESS board
4: a Wireless MPG is not included, pls check here
Start Up Procedure:
KL-Series CNC Manual (3789 downloads) KL-1212wiring (106 downloads)You can add mach3, Mach4 or Computer
Fully Licensed Mach3 (Authorized), Email you license file